7
3 Installation and Quick Start
3.1 Connections
Refer to Figure 2 and the descriptions below when connecting HD-Connect LE™.
Figure 2 Connectors on the HD-Connect LE™
1)
DC +5V in:
Connect the supplied DC power supply unit.
2)
RS-422:
Connect to HDV based editing system for 1394
→
RS-422 or to
your SDI based editing system for RS-422
↔
1394.
3)
HDV In:
Connect to your HDV source. You can use either the 4-pin or the
6-pin 1394 connector. NOTE: HD-Connect LE™ can only use one 1394
HDV source at a time.
4)
Unbalanced Audio Out:
3.5 mm unbalanced audio connector for
monitoring. HD-Connect LE™ outputs audio simultaneously through this
port, the AES port, and in the HD/SD-SDI stream.
5)
Analog Video Out:
Component HD and Composite SD output. CVBS is
not active in HD mode. Component is active in both HD and SD.
HD-Connect LE™ Guide and User’s Manual.
