21
Should you have other pieces of equipment downstream from HD-
Connect LE™ that add further frame delays through your setup, you may
wish to set an additional offset here.
Figure 17 Timecode Offset Selection.
3)
Audio Present.
This checkbox indicates whether audio should always be
present in the HDV data that streams to HD-Connect LE™ over the 1394
bus. For capture of source material from an HDV device, this checkbox
should normally be checked, since the device should always record audio
as it records the source material in the field. When HD-Connect LE™
knows that audio is expected in the HDV stream, it can correct for
problems that arise at scene transitions in the playback from certain HDV
sources and ensure that audio start up faithfully each time a controller
asks the device to play forward at normal speed. On the other hand, for
decoding HDV material that has been processed by an editing application
and recording it to tape, or for playing back material so recorded, this
checkbox should be unchecked. If it is left checked, HD-Connect LE™ will
expect audio and will repeatedly reset its decoding logic when it fails to
find audio data, causing the video to flash off and on.
4)
SD Style
. This drop down menu lets you select with what style the video
should be scaled in Standard Definition mode. This feature can either be
selected using the Control App (with DIP switches 6 and 7 both off), or can
be manually selected using the right combination of switches 6 and 7. The
HD-Connect LE™ Guide and User’s Manual.
