Setting the time on the control
(Fig 16)
You can also lock the settings at the cooler
by pressing the ON/OFF
button for 5
seconds. The
symbol will appear on
the display.
Repeat this to unlock the
settings.
Press the CLOCK Button. Then use the
Hour and Min button to set the correct
time. Press the CLOCK button again to
set.
The air conditioner incorporates it
’
s own
self diagnostics. The following table
shows the code and problem.
If you wish to lock the current settings of
the air conditioner, to prevent them from
being changed, do the following:
Press the HOLD
button on the remote
control. The
will be shown on the
remote control display, and
on the air
conditioner display. All buttons and
functions will now be locked.
To unlock, simply press the HOLD button
again .
and
will now disappear
and the buttons will perform their normal
functions.
Self check function
Self-lock function
9
How to cancel the timer
Setting the timer at the cooler
To cancel the timer, press the TIMER
button when either the TIMER OFF or
TIMER ON has been set.
will
disappear and the timer setting will be
cancelled.
Follow the same setting procedures as
above, for both TIMER OFF and TIMER
ON functions, by pressing the
button
on the control panel. The
setting will
be displayed. Adjust the timer by pressing
to increase the time. When the cooler
is ON, the display will flash after 3
seconds, and then revert to the
temperature. When the cooler is OFF, the
timer setting will be shown. To cancel,
press the
button until the timer symbol
disappears, or press the ON/OFF
button
TWICE.
Code
E1
E2
E5
dF
Indoor temperature sensor damaged
Evaporator tube sensor damaged
Water Full - Pump may be damaged
Defrost cycle in progress
Problem
16
Clock button
FUNCTIONS
Summary of Contents for Supercool
Page 2: ......
