Convaid Products, LLC
2830 California Street
Torrance CA 90503
Tel: 1-844-US-Mobility (844-876-6245)
www.convaid.com
G10211 1117
Page 2 of 3
To Install Front Anchors
NOTE:
Jam nut can only be threaded from the front side. Fig. 1, Fig. 4
1.
On the inside of the frame, remove nut and washer with 5/32” Allen wrench and 7/16” wrench. Fig. 2
2.
Install the anchor with spacer washers to the inside of the frame. (Longer bolt in front) Fig. 3, Fig. 5
3.
Push out the old bolts with the new hardware.
4. Install nuts and washers. (Thicker nut in front) Fig. 6
5. Tighten hardware with 5/32” Allen wrench and 7/16” wrench. (47 lb-in, 5.3 N-m)
6. Repeat for opposite side.
To Install Front Anchors with Depth Adjustable Solid Seat Pan Option
1.
Replace the long bolt in the front anchor assembly with the hex bolt. Fig. 7
2.
On the inside of the frame, remove nut and washer with 5/32” Allen wrench and 7/16” wrench.
3.
Install the anchor with spacer washers to the inside of the frame. (Longer bolt in front)
4. Push out the old bolts with the new hardware.
5.
Install nuts and washers. (Thicker nut in front)
6.
Tighten hardware with 5/32” Allen wrench and 7/16” wrenches. (47 lb-in, 5.3 N-m) Fig. 8
7.
Repeat for opposite side.
Fig. 1 Rear Anchors
Left
Front
Right
Fig. 2
Fig. 5
Fig. 4
Fig. 7
Fig. 8
Fig. 3
Fig. 6
Front
Back
Hex Bolt
