Convaid Products, LLC
2830 California Street
Torrance CA 90503
Tel: 1-844-US-Mobility (844-876-6245)
www.convaid.com
G10211 1117
Page 3 of 3
To Install Rear Anchors
1.
Loosen transit pin with Hex jaw vice grip and 7/16” wrench. Fig. 9
2. Remove four washers on the outer side of the frame. Fig. 10
3.
Remove hardware on the front bolt location. Fig. 11
4.
Replace jam nut and install transit anchor as shown. Fig. 12
5.
Apply Loctite
®
to the end of the rear bolt and tighten nut with #4 Allen wrench and 10 mm wrench (47 lb-in, 5.3 N-m).
Fig. 13
6.
Tighten transit pin with vice grip and 7/16” wrench.
Anchor Logo Sticker
Place anchor hook sticker next to all transit anchor locations. Fig. 14
Serial Label Sticker
Place the transit ready sticker over the non-transit hook
symbol on the serial label sticker. Fig. 15
Fig. 9
Fig. 12
Fig. 10
Fig. 13
Fig. 11
Fig. 14
Jam
2016-11-21
2016-11-21
CONVAID 2830 California Street (310) 618-0111
Torrance, CA 90503 USA (888) 266-8283
CONVAID 2830 California Street (310) 618-0111
Torrance, CA 90503 USA (888) 266-8283
Max
45.5kg
Max
45.5kg
Rodeo 14
S/N: RD14E-00001
Rodeo 14
S/N: RD14E-00001
