46
GB
Remove the screw on the top hinge of the door. Replace this
screw with the threaded hexagonal pin. This pin serves as the
lower hinge for the oven door. Fit the screws into the upper
hinge from below. Screw them in no more than two or three
turns.
Installing oven (option)
Hold the oven door in place on the threaded pin. Hook the top
hinge in place and loosely tighten one of the screws. Close the
oven door and adjust it so that it aligns horizontally. Then open
it carefully and tighten both screws.
Place the baking sheet in the oven. If necessary, adjust the
height of the baking sheet by turning the adjusting screw at the
bottom of the oven unit.
Installing convection fascia (option)
Open the door and place the flexible retaining brackets
in the convector fascia as shown in the picture.
First lift the convector fascia so that the brackets take their
place behind the front plate and then press the convector fascia
gently upwards. Now press in the front and let it slide to its
place.
ASSEMBLY
Summary of Contents for C690 Style
Page 1: ...LEK LEK Installation instruction www contura eu C 690...
Page 23: ......
