SOLO™ Access Control System
Part Code: CS-AC-3210
Introduction
The Controlsoft® SOLO™ is a complete standalone single
door access control system for use with Controlsoft
Proximity Cards or Fobs. This low cost controller has a
three digit LED display and two push buttons which are
used to program the system.
The SOLO is supplied with one reader head, suitable for
indoor and outdoor use. An optional second reader head
can be connected to provide IN and OUT readers.
Three versions are available:
CS-AC-3210
= Controller with Mullion reader
CS-AC-3210-V
= Controller with Vandal Resistant reader
CS-AC-3210-P
= Controller with Panel Mount reader
Technical Specifications
Power:
12V to 24V (ac or dc).
Current:
100mA @ 12V with 1 reader head.
Readers:
One or two compatible reader heads:
CS-AC-3211 Mullion
CS-AC-3212 Vandal Resistant or
CS-AC-3213 Panel Mount.
Inputs:
Normally Open Door Contact / Normally Open Fire Alarm / Normally Open
Request to Exit (REX) button.
Outputs:
Lock / Siren.
Display:
Indicates the status of the controller for programming.
Buttons:
Used to program the door controller.
Jumper:
Configures the controller for One or Two readers.
Users:
Up to 999
Step 1. Install the Controller
Separate the cover from the base.
Using the base as a template, mark the 3 mounting points top right, top left and
bottom centre and any cable entry holes. Drill and plug the holes (if required) and
mount the base.
Install the reader according to the instructions supplied with the reader.
www.controlsoft.com
9010-0011 Issue 3
Installation Instructions
