44
PANEL CONNECTORS
The control panel has three bulkhead mounted connectors. The engine harness connector is a 21 pin,
Deutsch HDP series. This connector includes all of the required circuits to start and run the engine.
The second connector is a 31 pin Deutsch HDP Series connector and includes the auxiliary inputs and
outputs of each model. The third is used to bring in the remote start switch signal in.
1. Engine Harness Connector:
HDP24-24-21PE
2. Accessory Connector:
DT04-4P-L012
3. Accessory Connector
HDP24-24-31PE
21 Pin Engine Harness Connector
Pin
Function
B
Battery Positive
G
ECU Power (RO2)
E
Battery Negative
D
Crank Signal (RO4)
J
Alternate Excite
V
CANBUS High
U
CANBUS Low
4 Pin Remote Start Connector
Pin
Function
1
Digital Input 1 – Close to Ground
2
Digital Input 2 – Close to Ground
3
Battery Negative
4
Battery Negative
