9
Pressure Operating Mode
The Pressure Operating Mode begins after the engine has reached the High Pressure On Setting.
The Controller will:
using the maintain targeting logic to appropriately adjust the TSC1 requested speed to achieve
the target pressure
minimum allowed speed is 1200 RPM
maximum allowed speed is 2150 RPM
increase the target pressure by 5,000 psi in response to each Throttle Up button press
maximum of 40,000 psi
decrease the target pressure by 5,000 psi in response to each Throttle Down button press
minimum of 15,000 psi
Clutch Operation
The Clutch automatically turns on when:
the engine reaches the High Pressure On Setting
The Clutch automatically turns off when:
the engine operation mode goes to idle OR
the engine stops running OR
the Controller enters a Controlled Shutdown phase
