PRODUCT INSTALLATION CONTINUED
3.
Make sure spa water is at the appropriate salt level (See “Salt Requirement” Section). Allow TechniChlor
to drape over the side of the spa, immerse in the water and vertically rest at the deepest point in
the spa. Plug Technichlor into the GFCI protected outlet, and after a brief pause, the unit will begin chlorine
production.
NOTE: If there are Solid
RED
and Solid
GREEN
Lights with no chlorine production at
start up, simply wait for the temperature of the unit to catch up to the spa water temperature
and the unit will automatically resume normal chlorine production.
4.
Attach the supplied cable clip to the outside of the spa by first inserting the cable into the cable clip. Then
use the wood screw to fasten the cable clip to any point near the spa’s edge.
