1
st
Issue 11/06 4
DMP054E
Introduction
The DG551C controller
•
allows the complete automatic control and management of the air-conditioning plant type
chosen among the various applications (see, further for a list) configured and existing in the
controller. In order to enable the required application, it is sufficient to carry out the controller
electrical connections according to the relevant scheme and to follow the instructions in the
present manual.
•
once the controller has been installed and connected, it is started up by simply switching on
power supply. No configuration intervention on the part of the user is needed. The only
necessary operations, to be carried out from the display, are to set time and time schedules. In
any case, it will be possible, using the display, to supervise and correct the origin values of the
variables.
Consider that:
•
no particular instrument, even the PC, is required to install and use DG550
.
•
all operations are carried out through the display in a simple and user-friendly way.
Start-up
Once the application type, from 1 to 9, has been chosen, and the relevant connections have been
carried out, stick the label (supplied in the package) which identifies the scheme number. This has
the purpose to make it evident for future interventions on the plant.
- Verify that the isolating strap, protecting the battery, has been removed, as described in the
paragraph LCD panel mounting at page 8
- Switch on power supply.
- After some moment, on the display the date and time appear. Press
Esc.
- Using the navigation button, select the menu
Set Clock
, set the current date and time and
confirm using the Enter button.
-
Press
Esc
. to go back to the start menu and verify the correct date and time are set.
At this time, if the pre-set parameters related to time programming (i.e. permanent operation) and to
the set value of the variables satisfy the plant requirements, the
controller becomes immediately
operating
.
In the frequent case a customised time and daily schedule is required, scroll the menu up to the
time to be modified (primary air or fan coil) and enter the required data using the procedure
described below.
Ex. 1 Programme: Monday to Friday, on 08, off 17. Saturday and Sunday off
On
Off
On
Off
Monday, Tuesday,
Wednesday,
Thursday, Friday
08:00
17:00
17:00
17:00
Saturday, Sunday
00:00
00:00
00:00
00:00
