ControlByWeb X-600M, User Manual

Page: 63 / 158

X-600M Users Manual Setup Pages
Access Groups:
This determines to which access groups this I/O belongs. Only users who belong to the same
access group will have access to the I/O when Dashboard and I/O Password Protection is enabled.
Log Activity:
When this option is enabled, any changes in this I/O's state will be logged to the system log.
Attempts to change the I/O state by a user will also be logged along with the user's name. This
feature is useful for security applications as well as general monitoring of a system.
4.4.1 I/O > 1-Wire Sensors (Add, edit and delete 1-wire sensors)
1-Wire temperature and humidity sensors can be connected directly to the X-600M's connector
terminals, and can also be found on external devices. These sensors must be registered, similar to other
I/O objects as described in the previous section, but they differ slightly when the device selected is the
X-600M itself. To add a 1-wire sensor connected directly to the X-600M, click the
Add New 1-Wire
Sensor icon.
Up to 32, 1-wire sensors can be connected to the X-600M (the “1-wire” sensors share the same data,
power and ground conductors) and are accessed using a unique hardware address. Similar to other I/O
objects, you will want to rename these objects to more useful names such as “outdoorTemp”. When you
subsequently configure the components on the Dashboard, you will appreciate the more descriptive I/O
name.
Xytronix Research & Design, Inc. Page 61