100
Commander SE Advanced User Guide
Issue Number: 4
The fieldbus option menu exists all the time within the drive. All the following Menu 15 parameters are stored in the drive
EEPROM, except those indicated. A generic description is given here, see the appropriate fieldbus module manual for more
details.
e.g. V03.02.01 = 3.02 (The ZZ component will be displayed in
15.50
)
0 = Disabled
The selected baud rate depends upon the fieldbus module fitted. See relevant fieldbus for baud rate settings.
The selected data format / mode depends on the fieldbus module fitted.
See relevant fieldbus manual for data format / mode settings.
*
Network Cycles per Second
15.01
Fieldbus ID
Ú
0 ~ 255
Ö
0
RW
Uni
Fieldbus
ID
Not Fitted
0
Profibus DP
1
Interbus S
2
CAN
5
15.02
Fieldbus software version Vxx.yy
Ú
0 ~ 99.99
Ö
RW
Uni
0-9
0-9
0-9
0-9
X
X
•
Y
Y
15.03
Fieldbus node address
Ú
0 ~ 255
Ö
0
RW
Uni
15.04
Fieldbus baud rate
Ú
0 ~ 9
Ö
0
RW
Uni
15.05
Data format / mode
Ú
0 ~ 99.99
Ö
0
RW
Uni
15.06
Fieldbus diagnostic
Ú
-9999 ~ 9999
Ö
*
RW
Bi
Value
Description
-2
Fieldbus initialisation failure.
-1
Initialisation complete but no network running.
0
Network running but no network cycles per second detected.
x
Network cycles per second detected.
NOTE
