17
Canceling an alarm call-out while listening to an alarm
message
To cancel the alarm call out while listening to an alarm message, do the following:
Step
Action
1.
Pick up the phone.
2.
Listen to the alarm message.
3.
When told, press the number ―1‖ key.
4.
Press the pound (#) key within ―1‖ minute to cancel the alarm call out.
5.
You can listen until you hear the WA-700 say goodbye or just hang up.
Note:
Canceling the call out sequence does not cancel an active alarm
(the WA-700 will
continue to beep and the alarm LED will be lit).
Canceling an alarm call out by calling the WA-700
To cancel the alarm call-out during an active alarm, do the following:
Step
Action
1.
Make the call to the WA-700
(phone number at alarm location)
2.
Wait for the WA-700 to answer
(5 or 10 rings—DIP switch selectable)
3.
Listen to the alarm message.
4.
Press the number ―1‖ key.
5.
Press the pound (#) key anytime during the message to cancel the alarm call out.
6.
Hang up the phone.
Canceling an alarm call-out with an answer machine/voice
mail device on the same phone line
To cancel the alarm call-out, do the following:
Step
Action
1.
Make the call to the WA-700
(phone number at alarm location).
2.
Let the phone ring the desired number of times
(before the other in-line device
can answer)
.
3.
Hang the phone up.
4.
Call the number a second time within three minutes
(The WA-700 keeps track of
all the rings from the previous calls, accumulates them until the total ring count
matches its ring count number 5 or 10, and then it will answer).
5.
Listen to the alarm message.
6.
Press the number ‗1‘ key.
7.
Press the pound (#) key anytime during the message to cancel the alarm call out.
8.
Hang up the phone.
Remote status check
During normal operation, the WA-700 will not answer any incoming calls. You can call the
WA-700 and get a response:
If the WA-700 is in alarm mode.
