SCADAPack Micro 16 Quick Start Guide
October 19, 2007
6
3.4
Install TelePACE Software
Insert TelePACE Programming Software Diskette #1 into the computer floppy diskette drive and run
the
setup.exe
file included on this diskette. Follow the instructions and install the TelePACE
Programming Software to the computer hard drive.
3.5
Configure Computer Serial Port
Open the TelePACE program and select
Communications – PC Serial Port Settings
from the
pull-down menu bar.
Select the
Default
button (lower right side of dialog box) and then change the
Port
(upper right
side of dialog box) to reflect the computer serial port assignment.
Select
OK
to close the dialog box.
com2
Null Modem
Cable
