SCADAPack Micro 16 Quick Start Guide
October 19, 2007
9
Controller serial port com2 is being used to write the ladder logic to the controller. It is
recommended, therefore, that the settings for com2 not be modified at this time. Any changes to the
com2 settings will disrupt the program download and cause a serial communication failure.
3.9
Program Ladder Logic
Program the ladder logic code for your application. Refer to the TelePACE Ladder Logic User
Manual for more information.
3.10
Configure Monitor List
Select
Edit – Monitor List
and add the registers that are to be monitored to the
Monitor Addresses
list on the right side of the dialog. This is accomplished, by either selecting addresses from the
Addresses in Use
list, and then selecting the
Addresses >>
button, or by entering a range of
consecutive registers into
the First Register
and
Last Register
boxes, and then selecting the
Range>>
button.
A completed Monitor List may appear like this:
3.11
Write Ladder Logic to the Controller
Select
Communications – Write to Controller
and write the ladder logic to the controller by
selecting
Start
from the dialog.
3.12
Monitor On Line Mode
Select
Activity – Monitor Online
and follow the screen prompts:
To Log On to the Controller, select
Start
.
