background image

 23

MERCHANTABILITY AND ANY WARRANTY OF FITNESS 
FOR A PARTICULAR PURPOSE, except that for product 
purchased directly by a consumer, any implied warranties are 
limited in duration to the term of the express warranties provided 
above.

Some states do not allow limitations on how long an implied 
warranty lasts, so the above limitation may not apply to you.

3.    EXCLUSIVE REMEDY FOR ANY 
NONCONFORMITIES 

If during the applicable Warranty Period, the product does not 
conform to the preceding Warranties, the Owner shall notify 
Control4 as provided below, and within a reasonable time 
Control4 will provide, at its option, one of the following:  (1) a 
replacement product for any nonconforming or defective 
component (such replacement product may be new or 
refurbished to be comparable in function and performance to a 
new product) or (2) the price at which Control4 sold the non-
conforming product.  In the event of repair or replacement, there 
may be a loss of data in the memory of the product for which 
warranty service is sought.  Control4 will not provide, and will 
not be liable for, labor, costs of removal or reinstallation of 
product, disposal, freight, taxes, or other incidental charges.

THESE REMEDIES ARE THE EXCLUSIVE AND SOLE 
REMEDIES FOR ANY BREACH OF WARRANTY. 

For any breach of warranty, the Owner must notify Control4 in 
Section 7 below within thirty (30) days after discovering the 
nonconformity.  The notice must describe the location and 
nature of the nonconformity.  The owner must give Control4 a 
reasonable opportunity to the claimed nonconformity before 
undertaking any repairs, removal or replacement. All products 
returned to Control4 require a Return Merchandise 
Authorization (RMA) number. The RMA number is obtained 
from Control4 Customer Support Department. The RMA 
number must be clearly marked on the outside of each box. The 
RMA is valid for a 30-day period. After the 30-day period, the 

Summary of Contents for AVM-16S1-B

































Reviews: