8
This section included the following:
`
Front View
`
Back View
`
Specifications
Front View
1.
IR window —
For capturing third-party IR codes from hand-held
devices (such as remote controls).
2.
Data LED —
Red LED light indicates data is received.
3.
Link LED —
Red LED light indicates Home Theater Controller has
been identified in a Control4 Composer project.
4.
Power LED —
Red LED light indicates AC power is present. This
LED will turn on approximately 30 seconds after the power is
applied to the device.
5.
Identification/Reset Button —
For identifying this device to the
system during initial setup. Also, serves as the device reset button
when pressed for 10 seconds or more.
2 3 4
5
1
