Contrec 515 FA01, Operation Manual

Page: 60 / 98

Instrument Calibration
50 515 FA01 - 29 August 2021
DAY LOGS Set the number of Daily Logs to appear on the printed log report.
The daily log entry occurs at 00 hours and 00 minutes each day.
WEEK LOGS Set the number of Weekly Logs to appear on the printed log report.
The weekly log entry occurs at 00 hours and 00 minutes each Monday.
MONTH LOGS Set the number of Monthly Logs to appear on the printed log report.
The monthly log entry occurs at 00 hours and 00 minutes on the first day
of the month.
YEAR LOGS Set the number of Yearly Logs to appear on the printed log report.
The yearly log entry occurs at 00 hours and 00 minutes on the first day of
the year.
RESET LOGS Reset the logged data. You may need to reset (clear) the logged data if
you change the time/log settings.
Press or to select YES, then press the key. The instrument
makes three beeps to confirm the reset command.
REPORT TYPE The Printer Protocol Report Type determines the nature of the printout
from the REPORT PRINT - HOLD.SET prompt in the main menu. The
following report types available in this instrument are:
•
REP-01 Hourly Logs Report
•
REP-02 Daily Logs Report
•
REP-03 Weekly Logs Report
•
REP-04 Monthly Logs Report
•
REP-05 Yearly Logs Report
•
REP-06 Previous Day’s 24 Hour Report (0Hr – 23Hr, minimum
48 hourly logs required)
Press or to select Report Type.
 
UNITS PARAMS INPUTS OUTPUTS ALARMS COMMS
TM/LOG
SETUP TEST END
SET
SET