Contracor 10130830, Instructions Manual

Page: 9 / 40

CONTRACOR
®
ASPECT Art. 10130830 9
Exchanging the polyester visor: Open the window frame and remove the grid and the
disposable windows. The polyester visor can now be extracted out of the rubber surround.
Take an original spare polyester visor and slide this into the surround.
Airline filter CONTRACOR
®
BAF.
For further information about the airline filter unit CONTRACOR
®
BAF refer to the
supplied manual documentation.
After replacing the components carry out a functional check.
Functional check: After cleaning, disinfecting or exchanging components check
the functioning of the system. Inspect all essential components for damage or pollution
and, if required replace these with original spare parts. If the yellow pennant of the airflow
indicator shows insufficient air in the abrasive blasting helmet, although the pressure is
correctly adjusted, this could indicate that a blockage has occurred in the compressed
air hose, coupling or silencer. During this check, hold the abrasive blasting helmet in the
vertical (normal working) position.
Checking hose system for leakages: Test air supply hose and coupling parts
manually on pull force. Connect abrasive blasting helmet to the compressed air system and
adjust the supply pressure. Air supply hose and couplings may not give leak sounds.