Contracor 10130830, Instructions Manual

Page: 7 / 40

CONTRACOR
®
ASPECT Art. 10130830 7
1.3. During use.
Adjust the air volume according to requirements. The integrated air flow indicator
warns the user if insufficient air is being supplied. The airflow indicator has been installed
in such a way that the yellow pennant will not be visible when the amount of air is sufficient
and it will only function when it is positioned vertically (fig. 2). For safety reasons, the
regulator cannot be closed entirely. Depart the working area immediately if there is an
interruption in the air supply.
Ensure that the compressed air supply hose cannot be trapped, causing interference
with the air supply or preventing a rapid departure from the work area.
The abrasive blasting helmet will not decrease environmental sounds. Therefore
supplementary hearing protection must be used.
Fig. 2. Working
position
Air Flow Indicator
1.4. After use.
After leaving the working area, unbuckle the belt, take off the helmet and disconnect
the air supply hose. Using a brush or a cloth, remove loose residue and dirt from the
components. Clean and inspect the components according to the instructions given in
paragraph 2 and 3. When connecting and disconnecting, take care that no pollution enters
the open hose connections.