Contracor 10130830, Instructions Manual

Page: 8 / 40

CONTRACOR
®
Version 3.0 8
2. Cleaning and disinfecting.
After each session clean the abrasive blasting helmet, using a mixture of water and a
mild detergent. Subsequently, rinse thoroughly with clean water. (Do not use any solvents).
The face collar or neck bib can be washed in the washing machine, using a soft detergent
at 30°C. Using a disinfectant, clean the inner surfaces of the abrasive blasting helmet.
Refer to the instructions given by the manufacturer.
For reasons of hygiene, the same person should preferably wear the abrasive blasting
helmet. Using compressed air, blow clean the coupling and the regulator. Finally, using a
dry cloth, dry all the metal components, to avoid corrosion. When cleaning, take care not to
inhale hazardous matter that is released during the cleaning.
3. Maintenance and inspection
abrasive blasting helmet.
Positioning the disposable windows: After opening the window frame on the helmet
type Aspect fit one or more disposable windows as protection for the safety glass (fig. 3).
Fig. 3.Exchanging disposable window(s) Aspect
Exchanging the neck seal: The neck seal can easily be exchanged by releasing of zipping.
Exchanging the cape: To exchange the cape remove it from the rubber ring.