4
Multiple application settings (ShuttlePRO series only)
Some applications, such as Adobe Premiere or Final Cut, allow multiple modes of usage.
Contour Shuttle devices address some of them by providing multiple sets of application settings
for these applications in the installation package.
You can switch between these settings through the ShuttlePRO Control Strip Module.
To switch settings or modes, do the following:
1. With desired application open and in the foreground, click the ShuttlePRO Control Strip
Module (found in the Control Strip. Refer to paragraph 2.2 on page 5.)
2. Notice that the ShuttlePRO Control Strip Module has each setting currently installed for the
desired application listed. The current active setting is shown in the Control Strip). Click the
setting you want to use.
3. Once you have selected the desired setting, you can use it immediately inside the
application.
You can also use the Control Strip to verify that the software is recognizing the application
currently in use: the name of the application currently in use will appear in the Control Strip
instead of Global Settings.
Fig. 4-1
The software is using Internet Explorer settings
Contour Shuttle Multimedia Controllers
14
