THE OAKMERE BATH
IMPORTANT INSTRUCTIONS FOR CUSTOMER
PLEASE READ CAREFULLY AND RETAIN FOR FURTHER USE.
IMPROPER USE OR CARE CAN INVALIDATE THE WARRANTY.
OPERATING INSTRUCTIONS
The Oakmere bath features a unique 2-part folding door to allow for easier access. A latch lock
and bolt are located on the left and right hand side of the doorway respectively. Simply 'slam
shut' door to close and lock into position. Always keep the door unlocked when not in use to
prevent wear out of the seal.
1. Prior to entering bath push door inwards holding the top of door just off center to it's non -
hinged side. The door then automatically folds back on its self as shown above.
2. In a standing position in bath shut door by pulling gently from the nearside central position
of door. Do Not pull from the far side as door will jam (as shown above). As door approaches
closed position push outwards to engage the latch lock and lock the door.
Now be seated. Bath is ready for use.
3. After bathing, remain seated whilst all the water is drained on release of the 2 wastes.
4. Pull Up on the lock knob in a standing position to release the lock and open door.
5. Exit bath and leave door unlocked when not in use to preserve the door seal.
*IT IS BEST TO HANDLE DOOR JUST OFF CENTRE ON NON-HINGE SIDE *
* NEVER ATTEMPT TO OPEN DOOR WHEN BATH IS FILLED WITH WATER *
* DO NOT LEAN ON DOOR OR USE FOR SUPPORT *
