audible science
audible science
OPERATING INSTRUCTIONS
CONT.
REMOVING RECORD PROCEDURE
Set the master amplifier volume control close to its
minimum setting to avoid any damaging your speakers.
Gently remove the stylus arm from the record and place
it on its rest position.
Press the selected speed button (LED will be on) on the
Control Unit to stop the motor and platter from spinning
(LED will turn off).
Press the Vacuum button on the Control Unit to turn the
vacuum off (LED will turn off). The record slowly rises up
away from the platter within a few seconds.
Wait about ten seconds, then remove clamp and spindle
seal. The record can now be removed from the platter.
If you have finished playing records, place a cover over
your Caliburn, to protect the platter, tonearm and stylus
from dust and to keep your Caliburn in pristine condition.
OPERATING
YOUR
CALIBURN
page 16
