audible science
audible science
OPERATING INSTRUCTIONS
CONT.
MANUAL SPEED SELECTION CONT.
RESTORE FACTORY DEFAULT SPEED SELECTION
On the Control Unit, press the SPEED selector button
to OFF (LED will turn off), and then press the VACUUM
button to OFF (LED will turn off).
Press simultaneously the “Speed Lower” and “Speed
Raise” push button on the Control Unit and hold
for 15 seconds.
The controller is now in FACTORY DEFAULT RESTORE
MODE. The original factory calibration settings are
restored.
To restore the “33 rpm speed factory default value”
Press the 33 rpm Speed selector button (LED will light
up). Press simultaneously “Speed Lower” and “Speed
Raise” buttons on the Control Unit, hold for
more than 15 seconds.
The 33 rpm speed setting is now reset.
OPERATING
YOUR
CALIBURN
page 24
