audible science
audible science
OPERATING INSTRUCTIONS
CONT.
MANUAL SPEED SELECTION CONT.
To Raise the speed of the platter push the “Speed Raise”
push button on the Control Unit. This will cause the
platter speed to increase by 0.1 r.p.m. each time it is
pressed.
The light on the push-button will start to flash once the
speed of the platter is greater than 0.1 r.p.m. than the
previous calibration value.
Once you have set the desired speed, you must wait
45 seconds, with no further adjustments for the Caliburn
Control Unit to accept and store the setting into its
memory as the new user default. Should you wish to
make further speed changes, repeat this procedure.
OPERATING
YOUR
CALIBURN
page 22
