background image

14

 Contononta netin  Synne   

 

DI PLAY

7  Rectifying malfunctions

The CeBS detects malfunctions, which then 
appear on the display in the form of error codes. 
Malfunctions detected by the CeBS appear in the 
centre of the display. The displayed error code 
specifies the cause of the malfunction to make 
the error easier to correct.

 WARNING!

Risk of electric shock!

Contact with open cable ends when the CeBS is 
switched on can cause electric shocks.
» 

Do not switch on the CeBS if you notice any 
open cable ends.

» 

Have the cabling inspected and repaired by 
your local cycle dealer.

If an error code appears on the display, immedi-
ately check which malfunction has occurred.
The letter in the error code relates to the affected 
component on the CeBS:

•  M = Motor
•  B = Battery
•  D = Display

»  Error codes that do not affect the function or 

safety of the unit can be acknowledged by 
pressing the 

 button.

»  In the case of permanent or recurrent error 

codes, please have your local cycle dealer 
check the malfunction using service software.

8  Storage

»  Please read the information on the storage 

temperature in the technical data for the 
display (

see "4.2 Technical data of the display").

9  Transporting the eBike with 

CeBS

 ATTENTION!

Risk of damage!

Impacts and bumps may damage the battery and 
display during transportation of the eBike.
» 

Remove the battery and display from the 
eBike and transport both separately.

» 

Transport the battery with special care.

»  Remove the battery from the battery holder 

on the eBike and cover the open contacts.

»  Always cover the display before transporting 

separately from the eBike. A tight seal is only 
fully guaranteed when the USB cover is closed.

»  When transporting an eBike fitted with a CeBS, 

ensure that none of the fitted components are 
damaged.

»  Secure the eBike fitted with a CeBS appropri-

ately to prevent damage to the CeBS compo-
nents. Before transporting the eBike, observe 
all the relevant specifications provided by the 
eBike manufacturer.

»  If you intend to transport your eBike by bus, 

aeroplane, boat or train, contact the relevant 
transport company to find out the conditions 
under which the battery will be transported.

10  Disposal

Never dispose of 
electrical equipment, 
electronic devices 
or batteries with the 
domestic waste. As 
a consumer, you are 
required by law to 

return electrical equipment, electronic devices 
and batteries to special public collection points 
or a specialist dealer at the end of their useful life.

Summary of Contents for XT 1.0

















Reviews: