FIGURE 3
CASTERS MUST BE TIGHT TO CABINET BOTTOM
INSTALLING CONDENSATE EVAPORATOR
No floor drains or plumbing connections are required since all models use an
automatic condensate water evaporating system. All models utilize a unique
hot air condensate water evaporating system which is completely self-contained
and no further assembly or maintenance is required. In some adverse conditions
such as high ambient temperature, high humidity, extremely heavy usage, frequent
loading for prolonged periods of time, and heavy pan loading, an optional electric
condensate evaporator pan may be purchased as an accessory. An electric
condensate evaporator pan is also supplied with all remote models. To install the
condensate pan, remove all rear cabinet cover screws and install the mounting
bracket on the case rear next to and behind the compressor as shown in figure 4.
Slide the condensate pan onto the bracket, install the drain tube into the pan
making sure it is not blocked or kinked, and plug the ten foot power cord into the
receptacle labeled “vaporizer” located on the compressor compartment electrical
box.
Important Note:
It is extremely important to be sure that the condensate pan is
plugged into its correct receptacle labeled “vaporizer” and that the condensing
unit is plugged into its correct receptacle labeled “condensing unit”.
9
