manualshive.com logo in svg

Continental Refrigerator C0EA21K, Operation Manual

Share
Download
Continental Refrigerator C0EA21K Operation Manual Download Page 9

9

easy

 ELECTRONIC CONTROL FOR REFRIGERATORS, FREEZERS AND WARMERS

OPERATIONS MANUAL

HOW TO TURN THE AUX (ANTI-CONDENSATE) HEATERS ON/OFF

Anti-condensate heaters are located around the door to eliminate condensation. In order to save energy 

these heaters can be turned off.

1.  To see the current state of the AUX (anti-condensate) 

heaters, press and HOLD the AUX HTR button for 1 

second. RELEASE the AUX HTR button. The display will 

show the current state of the heater when the button is 

pressed. In this case the heaters are currently ON.

2.  To change the current state of the AUX Heaters, press 

and HOLD the AUX HTR button. The display will show 

the current state of heater operation. After 5 seconds, 

the heater will switch to the opposite state and the 

display will return to displaying the cabinet temperature. 

RELEASE the button.

The control has a built in energy saving feature for the aux (anti-condensate heaters). When in 

the ON position, the “AUX” icon may not illuminate indicating the AUX heaters are not currently 

energized. The control will automatically energize the AUX heaters when the conditions require 

these heaters to be activated.

COMPRESSOR

EVAP FAN

DEFROST

AUX HTRS

ALARM

AUX HTRS (UP)

SET (MUTE)

POWER (DOWN)

DEFROST

2 BUTTONS

Summary of Contents for C0EA21K





























Reviews:

No comments

Brands by name

Popular brands

Load more brands