43
W415-1540 / 08.04.15
EN
7.8 NIGHT LIGHT DIMMER CONTROL
The auxiliary function controls the Night Light
TM
with
dimmable control.
A.
Use the Mode Key to guide you to the Night
Light icon.
B.
The intensity of the output can be adjusted
through 6 levels. Use the UP/DOWN arrow
keys to adjust the output level. A single beep will
con
fi
rm reception of the command.
35.21
76
76
°F
°F
OFF
7.9 CONTINUOUS PILOT / INTERMITTENT PILOT (CPI / IPI) SELECTION
A.
Use the Mode Key to guide you to the CPI mode
icon. Transmitter in the OFF position.
B.
Press the UP/DOWN to switch between IPI and
CPI modes. A single BEEP will con
fi
rm reception
of the command.
Note:
If the system is equipped with a CPI/IPI
toggle switch, set the CPI/IPI to CPI position to
enable remote CPI operation. If the switch is set
to IPI then it will only work in IPI regardless of
what is set on the remote control handset.
35.22
76
76
°F
°F
IPI
CPI
7.10 KEY LOCK
This function will lock the keys to avoid unsupervised operation.
A.
Press the MODE and UP keys at the same time.
B.
To de-activate this function, press the MODE and UP keys at the same time.
35.10A
76
°F
7.11 LOW BATTERY / MANUAL BYPASS
The life span of the remote batteries depends on various factors: quality of the
batteries, the number of ignitions, the number of charges to the room thermostat set
point, etc.
When the transmitter batteries are low, a Battery Icon will appear on the LCD
display before all battery power is lost. When the batteries are replaced this icon will
disappear.
35.24
76
°F
Summary of Contents for CX70NT
Page 62: ......