13
W415-0380 / E / 08.31.12
58"
42½"
41"
42 ½"
22 ½"
42 ½"
OUTSIDE
CHASE
OUTSIDE
OUTSIDE
OUTSIDE
CHASE
CHASE
CHASE
INSIDE
CHASE
INSIDE
INSIDE
INSIDE
CHASE
CHASE
CHASE
6"
22 ½"
Minimum clearance to combustible construction from appliance:
sides, back, bottom and top of the unit
0 inch
recessed
depth
22
inches
It is not necessary to install a hearth extension with this appliance.
When roughing in the appliance, raise the appliance to accommodate for the thickness of the fi nished fl oor ma-
terials, i.e. tile, carpeting, hard wood, which if not planned for will interfere with the opening of the lower access
door and the installation of many decorative fl ashing accessories.
Raise the appliance up to the height of the fi nished fl ooring to ensure control access and accessory installa-
tions.
4.1 MINIMUM CLEARANCE TO COMBUSTIBLES
4.2 MINIMUM MANTEL CLEARANCES
Combustible materials may be installed fl ush with the front of the appliance but must not cover any of the black
face-areas of the appliance. Non-combustible material (brick, stone or ceramic tile) may protrude in these
areas.
Combustible mantel clearance can vary according to the
mantel depth. Use the graph to help evaluate the clear-
ance needed.
MATERIALS
STUD
COMBUSTIBLE
TOP OF UNIT
7” MANTEL
6” MANTEL
4” MANTEL
2” MANTEL
7”
2”
4”
6”
!
WARNING
RISK OF FIRE, MAINTAIN ALL SPECIFIED AIR SPACE CLEARANCES TO COMBUSTIBLES. FAILURE
TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE A FIRE OR CAUSE THE APPLIANCE TO
OVERHEAT. ENSURE ALL CLEARANCES (I.E. BACK, SIDE, TOP, VENT, MANTEL, FRONT, ETC.) ARE
CLEARLY MAINTAINED.
WHEN USING PAINT OR LACQUER TO FINISH THE MANTEL, THE PAINT OR LACQUER MUST BE
HEAT RESISTANT TO PREVENT DISCOLOURATION.
73.1
MANTEL WIDTH
4
3
1
2
3
7
5
6
7
5
H
E
I
G
H
T
M
A
N
T
E
L
