18
W415-0857 / B / 02.14.11
RETAINER
RETAINER
6.2 BRICK PANEL INSTALLATION
Install the base panels as previously illustrated. Both side panels sit under the bracket tab. Holding the side
panel in position, bend down the tab to secure.
DRYWALL
DRYWALL
4”
MIN
6.3 FACING
Combustible materials may be installed fl ush with the front of the appliance but must not cover any of the black
face-areas of the appliance. Non-combustible material (brick, stone or ceramic tile) may protrude in these
areas.
It is not necessary to install a hearth extension with this appliance system.
When roughing in the appliance, raise the appliance to accommodate for the thickness of the fi nished fl oor
materials, i.e. Tile, carpeting, hard wood, which if not planned for will interfere with the opening of the lower ac-
cess door and the installation of many decorative fl ashing accessories.
6.4 FINISHING
See “FINISHING” section for complete instructions re-
garding mantel requirements and installations, log place-
ment and upper and lower louvre attachments.
