background image

7

W415-0872 / B / 12.02.10

We suggest that our woodburning hearth products 

be installed and serviced by professionals who are 

certified in the U.S. by the National Fireplace 

Institue® (NFI) as NFI Woodburning Specialists or 

who are certified in Canada by 

Wood Energy Technical 

Training (WETT).

with a layer of fi bre baffl es at the top to maintain a high temperature in the combustion chamber so that gases 
mixing with the preheated air from the secondary air manifold tube are easily ignited and burned. The appli-
ance sides and back are shielded to direct the heat upwards and forwards into the room.

Be sure to provide suffi cient combustion air. There are many other appliances in your home competing for air 
such as: a kitchen range hood, forced air heating devices or a bathroom exhaust fan. 

Expansion / contraction noises during heating up and cooling down cycles are normal and to be expected.

After extended periods of non-operation such as following a vacation or a warm weather season, the appliance 
may emit a slight odour for a few hours. This is caused by dust particles on the fi rebox burning off. Open a 
window to suffi ciently ventilate the room.

CALIFORNIA PROP 65 WARNING:

Use of this product may produce smoke which contains chemi-
cals known to the State of California to cause cancer, birth 
defects, or other reproductive harm.

If you experience smoking problems, you may need to open a 
door, a window or otherwise provide some method of supplying 
combustion air to the appliance.

HINT FOR INSTALLING PORCELAIN ENAMEL INSERTS:

Ensure the base of the porcelain side panels are protected from rubbing against the hearth when sliding your 
insert into the masonry fi replace.

Summary of Contents for CI-1402

































Reviews: