W415-1283 / E / 12.21.16
8.
Place log #7 onto the pin located in log #6 and onto the pin in log #5,
as shown in Figure 7.
9.
Place log #8 on the log support and let it rest against the notch in the
side of log #7, as shown in Figure 8.
HINT: The best view of log #8
is shown in the left side view below.
10. Place log #9 onto the pin located in log #6 and let it rest on the right
side corner log support and then place one pin into log #7, as shown
in Figure 9.
11. Place log #10 onto the pin located in log #7 and let it rest in the
middle of the right side log support, as shown in Figure 10. Place
one pin into log #1, as shown in Figure 10.
12. Place log #11 onto the pin located in log #1 and let it rest on the right
end log support, as shown in Figure 11.
13. Place charcoal lump #12 onto the two pins located in the center of
the burner, as shown in Figure 12.
14. Install the glowing embers, see "GLOWING EMBERS" section.
15. Sprinkle the charcoal embers around the log support, see
"CHARCOAL EMBERS" section. (Use illustration below as reference).
16. Place the charcoal lumps on top of the charcoal embers, see
"CHARCOAL LUMPS" section. (Use illustration below as reference).
NOTE: Do not cover the pilot or burner ports with media or embers.
Do not overfill.
39
Fig. 7
EN
RIGHT SIDE VIEW
GLOWING EMBERS
LEFT SIDE VIEW
Tear the embers into small thin pieces and spread evenly on top of the burner area. Care should be taken to
shred the embers into thin, small irregular pieces as only the exposed edges of the fibre hairs will glow.
The
ember material will only glow when exposed to direct flame; however, care should be taken to not
block the burner ports.
Blocked burner ports can cause an incorrect flame pattern, carbon deposits and delayed ignition.
PHAZER
TM
logs glow when exposed to direct flame. Use only certified "glowing embers" and
PHAZER
TM
logs available
from your authorized dealer / distributor.
DO NOT BLOCK THE BURNER PORTS. BLOCKED PORTS CAN CAUSE AN INCORRECT FLAME
PATTERN, CARBON DEPOSITS AND DELAYED IGNITION.
!
WARNING
Fig. 12
10
11
6
1
8
7
5
2
3
4
4
3
10
2
1
12
7
11
6
9
Fig. 11
PIN
Fig. 8
PIN
Fig. 9
PIN
Fig. 10
Summary of Contents for CBHD4N
Page 22: ...22 W415 1283 E 12 21 16 ound the pipe 21 1B COLLAR VENT PIPE SHIELD...
Page 23: ......
Page 66: ......
Page 67: ...65 W415 1283 E 12 21 16...
