30
W415-1283 / E / 12.21.16
INSTALLING COMBUSTIBLE BOARD
EN
CBHD4ST
CBHD4P
SIDE
WALL
6” (152mm)
MIN. TO A
SIDE WALL
45"
(114.3cm)
38 1/4"
(97.2cm)
43 1/4"
(109.9cm)
38 1/4"
(97.2cm)
Joint Compound where required
6” (152mm)
MIN. TO A
SIDE WALL
Joint compounds such as Durabond 90 and tapes that are resilient to heat and cracking should be used when
taping and mudding seams.
Setting tiles and grouting
We recommend you use tiles with a dry butt joint to be installed using a two-part mortar with an acrylic latex
additive, such as Mapei Kerabond/Kerlastic, to allow for slight movement in the normal operation of the
appliance.
If grout is used between the tiles, a polymer-based grout, such as Mapei Ultracolour plus, is recommended.
Primer/Paint
For a painted surface, use a 100% acrylic latex primer and finish coat. Paints may discolour.
THE SURFACE ABOVE THE APPLIANCE GETS VERY HOT. IF PROPER FINISHING MATERIALS ARE
NOT USED, CRACKING CAN OCCUR.
!
WARNING
Summary of Contents for CBHD4N
Page 22: ...22 W415 1283 E 12 21 16 ound the pipe 21 1B COLLAR VENT PIPE SHIELD...
Page 23: ......
Page 66: ......
Page 67: ...65 W415 1283 E 12 21 16...