![background image](http://html.mh-extra.com/html/continental-edison/cebds4022b3/cebds4022b3_instruction-booklet_2656868043.webp)
43
Press the BT button on the remote control or repeatedly pressing the MODE button
on the soundbar control panel until BT is shown on the LED display.
The LED display will flash to indicate that the soundbar is in Bluetooth pairing mode.
Ensure that the device you wish to connect is also in pairing mode and search for
“
CEBDS4022B3
” in its device list.
When the two devices are paired, the LED display on the soundbar will stop flashing
and remain constant. (The soundbar will now automatically re-pair with this device
whenever it is within range and has Bluetooth turned on.)
Notes:
• This sound bar can be paired with all devices equipped with Bluetooth wireless
technology.
• After pairing, your audio source and the soundbar will reconnect automatically as
soon as the Bluetooth source is selected.
• The Bluetooth function of the soundbar automatically switches to standby mode after
two minutes if no Bluetooth signal is detected. Press the key for 3 seconds to
reactivate the Bluetooth mode.
• The device can only be paired with one Bluetooth device at a time. To pair with
another device, cancel the Bluetooth pairing of your device then repeat steps 1 to 4
above with the new device.
• For optimal transmission quality, make sure that the sound bar and your Bluetooth
device are within 10 meters of each other and that no wall or electronic devices are
interfering with the transmission.
USB mode
The soundbar is compatible with USB flash drives of up to 64GB(Fat32 format) in
size and can play MP3 and WAV audio files directly.
Simply insert a compatible drive into the USB port on the back of the soundbar and
the unit will automatically switch to USB mode and play the first compatible track.
USB repeat mode (also accessed via the remote control) enables single track repeat
(ONE), all track repeat (ALL)
The media player also has a memory function that will recall and continue from the
last-played point when a USB flash drive that has previously been used with the
soundbar is reinserted.