38
2. Remote control set up
Pull the battery compartment cover towards you to remove it as shown in the diagram
below. Then insert two R03 / AAA batteries (not supplied) respecting the polarities
(+/-). Replace the cover on the battery compartment and close it by pushing lightly
until you hear a click.
The performance of the remote control is optimal at an angle of 30 ° and up to a
distance of 6m from the remote-control sensor. If the operating range is reduced, the
battery may need to be replaced.
Keep batteries, new or used, out of the reach of children. Take
care not to swallow the batteries, otherwise there is a risk of
chemical burns.
If you do not plan to use your soundbar for a long time, remove
the batteries from the remote control.
Make sure there are no obstacles between the unit's remote
control sensor and the remote control.
Do not expose the infrared remote control sensor to direct
sunlight or other strong light.
