Edition 05/2014 - X-ONE - page 25
SACOME, CONFIDENTIAL Document,
it is forbidden to duplicate or communicate this document without previous authorization.
When programmed water quantity is reached, display shows «change filter» together with the programmed
telephone number (machine keeps on working).
After servicing the water filter, please do the following:
-
Swith off the machine (ON / OFF button).
-
Press continuously buttons n°3 and n°4 on the left group while
-
Switch on the machine (ON / OFF button)
-
Display shows «Filter Reset».
Counter restarts from 0.
Service:
When service cycles number is reached, display shows «Service» together with the programmed telephone
number for service (change check valve gaskets, limitor, steam tap gaskets...).
After servicing the machine, please do the following:
-
Swith off the machine (ON / OFF button).
-
Press continuously buttons n°1 and n°2 on the left group while
-
Switch on the machine (ON / OFF button)
-
Display shows «Service Reset».
Counter restarts from 0.
The machine does not turn on:
The klixon is open and/or general relay is not supplied.
Possible reasons:
The heating boiler operate without water
General relay coil is switched off.
Solution:
Disconnect the machine from the power
Reset manually the klaxon
Check for water in the boiler
Restart the machine.
