LED-BLASTER -
2 x 10W RGBW LEDs multi-beam animation effects
Page 6
English
6.2 - Control panel
4
1
7 8
2
3
5
6
9
1 - Display
Indicates the status of your device
2 - DMX LED
Lights up upon detection of a DMX signal
3 - Master LED
Lights up upon activation of Master mode
4 - Slave LED
Lights up upon activation of Slave mode
5 - Sound LED
Flashes when your device is in music-sensitive mode
6 - Menu Button
Allows you to acces the menu
7 - Down Button
Allows you to select functions and modify their values
8 - Up Button
Allows you to select functions and modify their values
9 - Enter Button
Allows you to save changes
6 - Description
1
DMX Input
3-pin female XLR socket hardwired as follows:
- Ground: 1
- Negative signal: 2
- Positive signal: 3
Use this socket to transmit the incoming DMX
signal from a DMX controller or another unit to your
projector.
2
DMX Output
3-pin female XLR socket hardwired identically to the
output described above.
This socket can be used to daisy-chain more units
into your DMX circuit.
3
EASY-2 Input
Connect here the EASY-2 remote control (optional).
Please refer to paragraph 6.3 for more details.
4
Power
input
Allows you to power up your projector.
Please make sure the voltage delivered by the
electrical outlet is compatible with your
LED-BLASTER.
5
Power output
Allows you to daisy-chain more units in order to
optimise wiring of complex installations.
6
Microphone
Allows music-sensitive programs.
7
Menu
Allows you to adjust the behaviour of your device or
set its DMX address.
Please refer to next paragraph for more details about
this.
8
Fuse
If need to replace the fuse, please make sure the
new one has the exact same characteristics.
6.1 - Rear panel
2
5
4
1
8
3
6
7
