LED-BLASTER -
2 x 10W RGBW LEDs multi-beam animation effects
Page 9
English
7 - Various modes
7.1 - Automatic or music-sensitive mode
1 - Select
MASt
in the
SLMd
menu, the MASTER LED will light up.
2 - Use the
ShMd
menu to select a program or the sequence including all programs.
3 - Use the
SoUn
menu to activate the music-sensitive mode, the SOUND LED will flash with each pulse.
4 - Your device will use the internal programmation if the music-sensitive mode is deactivated.
7.2 - Master / Slave mode
1 - Use the DMX connectors (via XLR) to connect the units together.
2 - Configure the first unit (Master) as described above.
3 - Choose
SL 1
or
SL 2
via the
MASt
menu for slave units. Units set on
SL 1
will mimic exactly the Master device
while
SL 2
units will be synchronised in reverse mode.
The SLAVE LED of slave units will be lit as long as a DMX cable is connected to their DMX input.
7.4 - DMX modes and addressing
Regardless of its current mode (Master or Slave), your LED-BLASTER will react to any incoming signal detected via
its DMX input.
To configure its DMX address, please go to the
Addr
menu, press ENTER and use the UP and DOWN buttons to set
a DMX address.
Validate your choice by pressing the MENU button.
Note: the display will indicate:
when the motors rotation has been activated.
7.3 - Optional EASY-2 remote control
Buttons
Effects
STAND - BY
Activates or deactivates the Black-out mode
FUNCTION
For each pressure and
when holding down the
button:
1: Synchronous strobe
2: Asynchronous strobe
3: Music-sensitive strobe
Programs 1 to 8
selection
Motors speed:
1: Slow
2: Average
3: Fast
MODE
Strobe / Music-sensitive
(LED OFF)
Program (LED ON)
Flashing LED
The EASY-2 remote control is straightforward and easy to install. It is able to control
several synchronised units with the Master/Slave mode.
Plug your remote control into the Master projector Jack 6.35 chassis called «Only
for EASY-2», and daisy-chain the additional units via the XLR plugs, as you would
for a regular DMX cabling. This remote control gives you access to the following
functions: black-out, strobe, and show selection.
