English
IPairLED-5x12six
- 5x12W 6-in-1 LEDs, airDMX, battery-operated waterproof projector
Page 5
5 - Description
1
Power input socket
4-pin IP socket. Please use the supply cable to
connect it to the mains.
Please make sure the voltage is in adequation with
the product indications.
2
DMX Input
3-pin male IP DMX connector hardwired as follows:
Mass: 1 / Négative signal: 2 / Positive signal: 3.
Use the supplied cable to send the signal to your
projector, either from another projector or from a
DMX controller.
3
Power Button
Connects the internal battery.
Press this button to use your projector when it is not
connected to the mains.
Press this button to charge the battery when your
projector is connected to an electrical outlet.
4
Power output socket
4-pin IP plug.
The IP cable required for this plug is not supplied.
Get the optional female IP connector FICIP-POWf
(10468) to use this socket.
Caution
: Do NOT go over 650W on the same power
source.
5
DMX Output
3-pin female IP socket.
3-pin female XLR socket hardwired identically to the
DMX input.
Use the supplied DMX cable to connect your
projector to other projectors.
Get the optional IP FICIP-DMXm (10465) and
FICIP-DMXf (10468) connectors to create DMX IP
connections.
6
Release valve
Temperature variations during use and inactivity
periods affect the internal pressure.
7
Display
This intuitive display allows you to configure your
projector. Please refer to the next paragraphs for
more details about the projector configuration.
8
Display buttons
MODE
Allows you to access menus and select a function.
SETUP
Allows you to configure the parameters of the
functions chosen with the MODE button.
UP
Press UP to increase the adjustable values or browse
the sub-menus.
DOWN
Press DOWN to decrease the adjustable values or
browse the sub-menus.
9
Stand
Allows you to handle the projector on the ground
and adjust its angle.
Power In
DMX In
Power Out
DMX Out
1
7
8
9
2
3
6
5
4
