English
IPairLED-5x12six
- 5x12W 6-in-1 LEDs, airDMX, battery-operated waterproof projector
Page 8
Extra options
Allows you to activate the automatic display shutdown:
- ON means the display will remain lit.
- OFF means the display will automatically shutdown after a 20-second
period of inactivity. Press one of the menu button to keep it lit.
Activates or deactivates the use of an infrared remote control to control
the projector.
Resets to factory settings.
Caution
: your user program will be deleted.
DMX-WiFi
configuration
Allows you to choose the AirBox compatible mode
Activates or deactivates the DMX-WiFi function.
Allows you to select the channel used by the transmitter. Every device
must be set on the same channel than the other devices it wants to
communicate with.
Allows you to choose the WTR-DMX DONGLE compatible mode from
Briteq in
receiver
mode.
Activates or deactivates the DMX-WiFi function.
The projector is waiting for the connection.
Allows you to choose the WTR-DMX DONGLE compatible mode from
Briteq in
transmitter
mode.
Activates or deactivates the DMX-WiFi function.
The projector is waiting for the connection.
Battery
Displays the battery status:
-
_ _ _ _ : Battery disconnected
-
000% ~ 100% : Indicates the charge level of your battery
(percentage).
-
Remember to turn off the LEDs panel via the
Blackout
menu to
optimize the battery charge time.
Power-saving
mode
When activated, LEDs intensity will gradually decrease when battery
levels are below 80%
About using the battery:
- The charging process can only start when the Power button has been pressed and the projector is connected to
an electrical outlet.
- If the LED panel is on, the charging time of the battery will be much longer. You can turn off the LED panel via
the
Blackout
menu.
- The display will flash when battery levels are below 30%.
- You will be required to initialise the gauge of the projector upon a battery replacement. This process is described
below:
- Please make sure the projector is not powered up.
- Use the Power button (3) to turn the projector off.
- Press and hold the DOWN button and turn the projector on via the Power button (3). The display will indicate
. The gauge is then initialised.
- Release the DOWN button and charge your battery.
