Evora-SP60
- 60W LED compact moving head with motorized focus and prisms
Page 9
English
Displays the current version of the internal software
Time before the motors and LED shuts down in
case of DMX signal interruption
From 1 to 99 minutes
This function can be deactivated by choosing "OFF".
7.2 SET menu (continuation)
Allows you to lock the device to be able to configure the focus and test each channel
Tests the channels. Select a channel (values 01 to 11
corresponds to channels) and press ENTER to launch the test.
Focus configuration: When this function is activated, the
Evora-SP60 is positioned at 90° to configure the focus.
Motors calibration: Allows you to position very precisely some
of the motors of the Evora-SP60. A password is required to
access these settings: C050.
This menu allows you to check on the operating time of your device.
Operating time (in hours).
7.3 ADJU menu
7.4 TIME menu
Colour wheel calibration: The range of values
goes from -128 to 127.
Prism calibration: The range of values goes from
-128 to 127.
Prism indexing calibration: The range of values
goes from -128 to 127.
Gobo wheel calibration: The range of values
goes from -128 to 127.
PAN calibration: The range of values goes from
-128 to 127.
TILT calibration: The range of values goes from
-128 to 127.
