Evora-Flex5R
- SPOT/FROST moving head with Philips
©
MSD PLATINUM 5R lamp
Page 7
English
7 - Menus
This menu allows you to change the initial DMX address, visualise the channels DMX values and select an operating mode.
The Evora-Flex5R features many menus allowing you to configure its every move and function.
Press
MODE / ESC
to access the main menu.
Use the navigation keys to browse through submenus. Then press
ENTER
to access a submenu.
Use the
and
navigation keys to change values.
Press
ENTER
to save changes.
Press
MODE /ESC
again to leave a submenu.
Please note :
• Values in bold are the default values.
• In order to access menus when the moving head is turned off (thanks to the internal battery), press DC Switch and hold for
more than 2 seconds. If the buttons are not used and remain inactive for 1 minute, the display will automatically turn off.
• When browsing through menus, values in blue are values currently in use. When entering a new value, it will be written in
red until you save changes by pressing
ENTER
.
7.1 FUNCTION
Submenus
Values
Description
Set DMX Address
From
001
- 495
Assigns a DMX address.
The moving head automatically activates the DMX mode
once the DMX address has been configured.
DMX Value
All
, Chase speed, Color mode, ...
Allows you to visualise the DMX value of each channel.
Slave Mode
Slave1
, Slave2, Slave3
Allows you to determine how the moving head will react
when the slave mode is activated. When many devices
are required, you can create several groups (1,2 or 3).
Using the master/slave mode allows you to send
different programs to each group.
Please refer to paragraph 7.6 for more details about
projector groups and programs.
Auto Program
Alone
, Master
Once the Automatic mode is activated, the moving head
can operate by itself or as a Master unit.
Sound Control
Alone
, Master
Once the Music-sensitive mode is activated, the moving
head can operate by itself or as a Master unit.
