Contec VPC-3100-G Series, Reference Manual

Page: 74 / 115

—
Software RAID Setup
—
VPC-3100-G Series Reference Manual
- 74 -
5
Change the "RAID Level" item to "RAID 1 (Mirror)".
Select the target drive under the "Select Disks" item, and then select "Create Volume."
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
Main Advanced Chipset Security Boot Save & Exit
Create RAID Volume
Name: Volume1
RAID Level [RAID1(Mirror)]
Select Disks:
SATA 0.X, XXXXXXXXXXX [X]
:xxxxxxxx, xxxGB
SATA 0.X, XXXXXXXXXXX [X]
:xxxxxxxx, xxxGB
Capacity (MB) XXXXX
▶
Create Volume
→←
:Select Screen
↑↓
:Select Item
Enter:Select
+/-:Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.
6
Volume is created and configuration information is displayed.
Save the changed setups and exit with "Save Changes and Exit”.
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
Main Advanced Chipset Security Boot Save & Exit
Intel® RST 14.8.0.2377 RAID Driver
RAID Volumes:
▶
Volume1, RAID1(Mirror), XXXXXGB, Normal
→←
:Select Screen
↑↓
:Select Item
Enter:Select
+/-:Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.