Contec VPC-1700-G Series, Reference Manual

Page: 73 / 116

—
Software RAID Setup
—
VPC-1700-G Series Reference Manual
- 73 -
2. Software RAID Setup in the BIOS
When using software RAID, it is possible to create RAID volume (mirroring) by the following
procedure. * 1
Please perform system recovery after RAID volume creation.
* 1 For the software RAID model, the RAID volume has already been created.
1
Select "SATA Configuration" menu from Advanced in Main.
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
Main Advanced Chipset Security Boot Save & Exit
▶
CPU Configuration
▶
SATA Configuration
▶
PCH-FW Configuration
▶
Trusted Computing
▶
AHCI Setting
▶
SMART Setting
▶
Super IO Configuration
▶
Hardware Monitor
▶
Network Stack Configuration
→←
:Select Screen
↑↓
:Select Item
Enter:Select
+/-:Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.
2
Change the "SATA Mode Selection" item to " Intel RST Premium with Intel Optane System
Acceleration".
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
Advanced
SATA Configuration
SATA Controller(s) [Enabled]
SATA Mode Selection [Intel RST Premium
with Intel Optane
System Acceleration]
SATA Test Mode
[Disabled]
Serial ATA Port 0 Empty
Software Preserve Unknown
Serial ATA Port 1 Empty
Software Preserve Unknown
Serial ATA Port 2 Empty
Software Preserve Unknown
Serial ATA Port 3 Empty
Software Preserve Unknown
Serial ATA Port 4 Empty
Software Preserve Unknown
Serial ATA Port 5 Empty
Software Preserve Unknown
→←
:Select Screen
↑↓
:Select Item
Enter:Select
+/-:Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.
Change to “Intel RST Premium with Intel Optane System
Acceleration”