2. Setup
VNA-300M-PCI
19
Changing the device name
(1) Double click the device on the device manager to display the property page of device. Enter the
device name in the common settings tab page and then click [OK].
*
Make sure that you do not use the same name for more than one device.
Setting whether a pi-network jig is present and setting the reference clock
(1) In Device Manager, double-click the device to display its property page. On the Setting tab, select
[ON] or [OFF] for PI Circuit and set the reference clock, and then click [SET].
(2) After you finish configuring the settings, click [OK].
You have now finished installing the initial setting of Software.