6. About Hardware
SMC-4DL-PCI, SMC-8DL-PCI
53
6.
About Hardware
This chapter provides hardware specifications and hardware-related supplementary information.
For detailed technical information
For further detailed technical information (“Technical Reference” including the information such as an
I/O map, configuration register, etc.), visit the Contec's web site (http://www.contec.com/support/) to
call for it.
Hardware specification
Tables 6.1 - 6.6 list the hardware specifications of the board.
Table 6.1. Common Section
Specification
Item
SMC-4DL-PCI
SMC-8DL-PCI
Control target
Stepping motor or servo motor driver unit(pulse train input type)
Number of axes to control
4axis
8axis
Device used
PCL6143 (Nippon Pulse Motor CO., LTD.) or equivalence to it
Interrupt
1 ch
Interrupt factor
At the time of stop by positive-direction end limit input ON
At the time of stop by negative-direction end limit input ON
At the time of stop by alarm input on
At the time of stop by simultaneous stop operation
At the time of stop by deceleration (decelerated stop) input on
At the time of occurring the encoder input error
The other event (setting by the software)
I/O address
Any 128 ports boundary
Current consumption (Max.)
5VDC 700mA
5VDC 1200mA
Operating condition
0 - 50°C, 10 - 90% (No condensation)
PCI bus specification
32-bit, 33MHz, Universal key shapes supported *1
Dimension (mm)
176.41(L) x 106.68(H)
Connector used
HDRA-EC
[made by HONDA TSUSHIN
KOGYO CO., LTD.] or equivalence
to it
HDRA-E100W1LFDT1EC-SL+
[made by HONDA TSUSHIN
KOGYO CO., LTD.] or equivalence
to it
Weight
100g
120g
*1
This board requires power supply at +5 V from an expansion slot (it does not work on a machine with a +3.3V power
supply alone).
