Contec SMC-4DL-PCI Page 11 User Manual Download

Page: 11 / 64

1. Before Using the Product

SMC-4DL-PCI, SMC-8DL-PCI

Safety Precautions

Understand the following definitions and precautions to use the product safely.

Safety Information

This document provides safety information using the following symbols to prevent accidents resulting in
injury or death and the destruction of equipment and resources. Understand the meanings of these labels
to operate the equipment safely.

DANGER

DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or in property damage.

Summary of Contents for SMC-4DL-PCI

































































Search results

Summary of Contents for SMC-4DL-PCI

Reviews:

Related manuals for SMC-4DL-PCI

Brands by name

Popular brands

Contec SMC-4DL-PCI, User Manual

Search results

Summary of Contents for SMC-4DL-PCI

Reviews:

Related manuals for SMC-4DL-PCI

Brands by name

Popular brands